Metal Print > Science > Space Exploration > Space Shuttle
Metal Print : NASA Langley Magnetic Suspension / Balance System
Metal Prints from Space Images
NASA Langley Magnetic Suspension / Balance System
A shuttle model is magnetically suspended in the transparent hexagonal test section of the MIT/NASA Langley 6 inch MSBS. Massive power supplies are required to drive electromagnets for model position control. A unique electromagnetic position sensor, similar to a linear variable differential transformer, provides five degrees of freedom for the test model. The low speed (Mach 0.5) wind tunnel was hand crafted from mahogany. Aerodynamic forces on the test model are measured by the proportional electrical current used to hold the model in place. The system was built by MIT in the late sixties, and was relocated to Langley in the mid eighties. In a joint effort with Old Dominion University in 1992 the MSBS was used to test the aerodynamics of store separation, simulating a bomb released from an aircraft. The system has been donated to Old Dominion University
Space Image feature a selection of NASA's incredible imagery
Media ID 635565
© NASA
Langley Magnetic Space Shuttle System
16"x20" (51x41cm) Metal Print
Experience the wonders of space technology with our Media Storehouse Metal Prints featuring the NASA Langley Magnetic Suspension / Balance System. Witness the awe-inspiring sight of a shuttle model suspended in mid-air by powerful electromagnets within the transparent hexagonal test section of the MIT/NASA Langley 6 inch MSBS. Our high-quality Metal Prints bring the intricacy and detail of this remarkable engineering feat into your home or office, making it an ideal conversation starter. Each print is meticulously crafted using premium metal materials and vibrant, long-lasting inks to ensure a stunning and durable display. Immerse yourself in the world of space exploration and innovation with Media Storehouse Metal Prints.
Made with durable metal and luxurious printing techniques, our metal photo prints go beyond traditional canvases, adding a cool, modern touch to your space. Wall mount on back. Eco-friendly 100% post-consumer recycled ChromaLuxe aluminum surface. The thickness of the print is 0.045". Featuring a Scratch-resistant surface and Rounded corners. Backing hangers are attached to the back of the print and float the print 1/2-inch off the wall when hung, the choice of hanger may vary depending on size and International orders will come with Float Mount hangers only. Finished with a brilliant white high gloss surface for unsurpassed detail and vibrance. Printed using Dye-Sublimation and for best care we recommend a non-ammonia glass cleaner, water, or isopropyl (rubbing) alcohol to prevent harming the print surface. We recommend using a clean, lint-free cloth to wipe off the print. The ultra-hard surface is scratch-resistant, waterproof and weatherproof. Avoid direct sunlight exposure.
Made with durable metal and luxurious printing techniques, metal prints bring images to life and add a modern touch to any space
Estimated Image Size (if not cropped) is 50.8cm x 40.6cm (20" x 16")
Estimated Product Size is 51.4cm x 41.2cm (20.2" x 16.2")
These are individually made so all sizes are approximate
Artwork printed orientated as per the preview above, with landscape (horizontal) orientation to match the source image.
FEATURES IN THESE COLLECTIONS
> Architecture
> Tunnels
> Science
> Space Exploration
> Related Images
> Science
> Space Exploration
> Space Shuttle
> Space Images
> Departments
> Langley Research Center
> Space Images
> Extraordinary
EDITORS COMMENTS
This print showcases the NASA Langley Magnetic Suspension/Balance System (MSBS), a remarkable piece of engineering that revolutionized aerodynamic testing. In the image, a scale model of a space shuttle is magnetically suspended within the transparent hexagonal test section of the 6-inch MSBS, developed jointly by MIT and NASA Langley. The system's electromagnets, powered by massive supplies, enable precise control over the position of the model. A unique electromagnetic position sensor with five degrees of freedom allows for accurate measurements during testing. Crafted from mahogany, this low-speed wind tunnel was meticulously handcrafted to ensure optimal conditions for experimentation. A key feature of this pioneering system is its ability to measure aerodynamic forces on the test model through proportional electrical currents used to maintain its position. Originally built by MIT in the late sixties, it was later relocated to Langley in the mid-eighties before being donated to Old Dominion University in collaboration with them in 1992. Notably, this magnetic suspension/balance system played an instrumental role in simulating store separation dynamics—specifically bomb release—from aircrafts during joint research efforts between NASA Langley and Old Dominion University. This photograph immortalizes both the ingenuity behind this groundbreaking technology and its significant contributions to aerospace research and development.
MADE IN THE USA
Safe Shipping with 30 Day Money Back Guarantee
FREE PERSONALISATION*
We are proud to offer a range of customisation features including Personalised Captions, Color Filters and Picture Zoom Tools
SECURE PAYMENTS
We happily accept a wide range of payment options so you can pay for the things you need in the way that is most convenient for you
* Options may vary by product and licensing agreement. Zoomed Pictures can be adjusted in the Cart.